Skip to main content

WHAT IS BIO-MEDICAL ENGINEERING ?


WHAT IS BIO-MEDICAL ENGINEERING?


                
                  Bio-medical engineering is a branch of engineering. Which is design instruments, devices                   and software which is used in health care and hospital.

                 Bio-medical engineering is a very huge field which is combined a human biology and                           engineering and work with the human body.

                 Bio-medical engineer is a design a problem solving instruments in health care.

  • What types of interest need to become a Bio-medical engineer.
  1. ·        Interest in human biology
  2. ·        Problem solving skill
  3. ·        Interest in circuit designing
  4. ·        Interest in coding
  5. ·        Interest in human biology as well as engineering
  • Machine which is developed by Bio-medical engineer.
·                         →   MRI machine
·                         →  CT scan
·                         →   Ultrasonic machine
·                         →   Defibrillator
·                         →  Pacemaker
·                         →  Dialysis
·                         →  Artificial limbs
·                         →  Prosthetic parts of human body
·                         → Fluoroscope

        There are so many equipment's which is developed by the Bio-medical engineer.
  • Medical imaging technology.
         Medical imaging technology is a branch of instrument which is created a visual representation             of the interior part of the body. For the diagnosis without cut the body.

         MRI, CT scan, Fluoroscope, Angiography are the instrument of the imaging technology.
  • Therapeutic medical instrument.

         Therapeutic medical instrument is a branch of the instrument which is used for the heal injuries.
          IFT, TENS, Dialysis, Infusion pump are the types of the therapeutic medical instrument.
  • Critical care instrument.
         The instrument which is used in ICU or CCU to treat the critical ill patient. These instruments             are known as the critical care instrument.

         Defibrillator, Pacemaker, cardiac monitor, ventilator, heart-lung machine, are the types of the               critical care instrument.

         Bio-medical engineering is a field which is save the life and develop easy procedure for                 the doctor.




Labels:

Comments

  1. Khan shafiNovember 25, 2019 at 6:42 PM

    Great i got some knowledge

    ReplyDelete
  2. UnknownNovember 26, 2019 at 7:25 AM

    Every one he is Very best blogger for Biomedical and I got some knowledge in thi Blogg.👌👌

    ReplyDelete

Post a Comment

Popular posts from this blog

MICROPROCESSOR BASED VENTILATOR

Microprocessor based Ventilator   Figure shows the block diagram of microprocessor controlled ventilator.(given below). It consists of two inter-connected systems: The Pneumatic flow system and an Electronic control system. The pneumatic flow system enables the flow of gas through the ventilator. Oxygen and medical grade air enter the ventilator at 3.5 bar (50 psi) pressure. These gasses enter the air/oxygen mixer where they combine and gasses then enter a large reservoir tank. An electronically controlled flow valve proportions the gas flow from the reservoir tank to the patient breathing circuit.   As the gasses leave the ventilator, they pass by an oxygen analyzer, a safety ambient air inlet valve and a back-up mechanical over pressure valve. The microprocessor controls each valve to deliver the desired inspiratory air and oxygen flows for mandatory and spontaneous ventilation. The electronic control system may use one or...
Post a Comment
Read more

DC defibrillator principle & defibrillator.

                          DC DEFIBRILLATOR:   In almost all present-day DC defibrillators, an energy storage capacitor is charged at a relatively slow rate (seconds) from the AC line by means of a step-up transformer and rectifier arrangement or from a battery and a DC to DC converter arrangement the energy stored in the capacitor is then delivered at relatively rapid rate (millisecond) to the chest of the patient.             The basic circuit diagram of a DC defibrillator is shown in Figure. A variable auto-transformer T1 forms the primary of a high voltage transformer T2. The output voltage of the transformer is rectified by a diode rectifier and is connected to a vacuum type high voltage change-over switch. In position A, the switch is connected to on...
Post a Comment
Read more

BED SIDE MONITOR/ MULTI PARA MONITOR

Bed side Monitor/ Multi-para Monitor: The Bed side monitoring system is designed to display an electrocardiogram, heart rate with high and low alarms, pulse rate, dynamic pressure or other waveforms received from external preamplifiers. The system basically consists of three circuit blocks: Preamplifier section, Logic boards and Display part. Various amplified signals are carried to a multiplexer and then to an analog-to-digital converter, included in the logic board. The central processing unit along with memory gives X and Y output for the CRT display. The character generator output is mixed with the Y output for the CRT display. The alarm settings, selection switches for different parameters and the defibrillator synchronization system communicate with the CPU.   The alarm signals are also initiated under its control. The memory comprises 5K bytes ROM and 3.25K bytes RAM with 256 samples of ECG It basically co...
Post a Comment
Read more